- Back to homepage
- Related articles
  Related articles

Creative Pebble V3 2.0 USB-C Speakers with Bluetooth 5.0 Review

Audio/Speakers&Amps by stefan @ 2020-12-10

After connecting the Pebble V3 to a power source with a minimum delivery of 10W, we have turned on high gain from the right speaker and started listening to various audio content. The clear highs are the ones you will notice first, and this means very clear voice delivery, ideal when having long conferences while working at home as well! The included sound card really pays off (Clear Dialog), and thanks to the larger drivers versus V2, the bass response is now better but do not expect it to have low frequencies as when you would use a separate subwoofer.

A Closer Look Part II

While the V2 has had 116 x 122 x 115 mm dimensions for the speakers, the V3 is larger at 123 x 120 x 118 mm, which also allows the driver to be bigger, from 2’’ to 2.25’’:

The right speaker comes with the status LED, the Volume controller which also acts as an On/Off button but also the Bluetooth mode switch near it:

The drivers are elevated at 45 degrees in order to have a better orientation versus your ears, when you are using the setup connected to a laptop/desktop PC. This basically makes the highs even clearer, like you would be using a good quality headset:

In the back of the right speaker we will note a subtle black passive radiator, to help with the low frequency delivery:

Further down we will take note of the AUX port, for connecting analog sound sources:

The speaker does have a round rubber foot on the bottom, the sticker with the product serial number but also a Gain H/A switch. If the power delivery via USB is 10W or more, the 8W RMS capabilities are enabled, for bringing even louder audio and better bass response:

No comments available.

All information and graphics contained in Madshrimps are sole property of the Madshrimps crew and may not be reproduced or copied in any manner without written permission from us.