Fanless and silent

Completely fanless, virtually noiseless

Large aluminum heatsink

Passive cooling through convective heat transfer

Ideal for noise-sensitive environments

Fanless means less dust inside the case and thus virtually no maintenance required.

 

24/7 Nonstop Operation

This device is approved for 24/7 permanent operation.

Requirement: Free air circulation around the PC must be guaranteed.

This device comes without a power-on button. The boot process starts as soon as power is applied.

 

Chassis

Black chassis made of aluminum and steel

Dimensions: 92.4 x 54.4 x 90 mm (LWH) = 450 ml

(Height including rubber feet)

Weight: 0.48 kg net and 1.03 kg gross

With hole for Kensington Lock

IP protection rating: IP20

 

Operation Positions

1) Mounted on a DIN-Rail (e.g. inside equipment racks)

2) Vertical (e.g. VESA-mounted behind an appropriate monitor)

3) Standing on its rubber feet as a desktop PC

 

Operation System

This system comes without operating system.

It is compatible with:

- Windows 10 (64-bit)

- Linux (64-bit)

 

Processor

Intel® Pentium® processor J4205, Quad Core

CPU clock frequency: 1.5 GHz, max. Turbo frequency: 2.6 GHz

Code name: "Apollo Lake"

14 nm structure, FCBGA1296 package (soldered)

CPU cores / Threads: 4 / 4

L2 Cache: 2 MB

Thermal Design Power (TDP): 10 W

Supports x86-64, AES-NI, VT-x (EPT), VT-d

System-on-Chip processor (SoC) with integrated graphics processor, no additional chipset required

Fanless cooling system

 

Integrated Graphics

The Graphics Processing Unit (GPU) is integrated in the processor.

Intel® HD Graphics 505 (Intel Gen 9), graphics frequency: 250~800 MHz

Supports DirectX 12, Intel Quick Sync Video, Intel Clear Video (HD), Shared Memory

Execution Units (EU): 18

 

UEFI Firmware

16 MB Flash ROM with AMI UEFI BIOS Firmware

Based on the Unified Extensible Firmware Interface (UEFI)

Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states

Supports boot up from external flash memory cards (USB or SD card)

Embedded Firmware TPM v2.0 (fTPM), can be activated in BIOS setup

Supports Hardware Monitoring and Watch Dog functionality (fixed timer)

RAM Memory

8 GB LPDDR4 RAM memory (2400 MHz), soldered

Flash Memory

64 GB eMMC flash memory

Expandable via Micro SD card

 

M.2 expansion slot

The M.2-3042 B-key expansion slot provides the following interfaces:

1) PCI-Express Gen. 2.0 X1

2) SATA v3.0 (max. 6 Gbps)

3) USB 3.2 Gen 1

The following components can be used in this slot:

1) optional HDMI capture card MCAP01 or

2) optional LTE/4G module or

3) optional WLAN module or

4) M.2-2242 SSDs with SATA interface (B+M key) or with NVMe interface (M key)

Note: Please go to the "Advanced" tab in the BIOS setup and set "M.2 Device Select" to "PCIe" or "SATA" according to the type of M.2 card used.