- Back to homepage
- Related articles
  Related articles

CORSAIR Commander PRO Build Review

Others/Miscelleneous by stefan @ 2017-10-29

The CORSAIR Commander PRO controller makes your live easier if you want to connect lots of compatible RGB fans inside the case, LED strips, but also control the LED light show in detail. The device permits monitoring of system temperatures from the included thermistors, but also connect other LINK-compatible hardware to the dual USB 2.0 headers. It measures 133mm x 69mm x 15.5mm so its slim form factor allows installation in most computer cases.

A Closer Look Part V

By lifting the top cover, we’ll get to see the documentation, bundle and more!

The documentation is written in multiple languages and provides the user with lots of details:

We are also offered a “Important Safety Information” and “Warranty Guide” leaflet:

We do get a power lead, mounting screws, a nice case badge, cable ties, but also a carry bag which contains the modular cables:

In more detail, we are getting one 24-pin ATX cable, two EPS/ATX 12V 8-pin (4+4) cables, three PCIe 8-pin (6+2) cables, two regular SATA cables (each having four connectors), two 90 degrees SATA cables, also having four connectors per cable, two peripheral cables with four pins (four connectors per cable) and finally one floppy adapter (4-pin):

The PSU is individually packaged inside a good quality cloth bag:

The included fan does sport the usual CORSAIR colors and is covered by a protective grill:

On the side of the PSU, we will be able to spot a frame with the manufacturer logo, along with the product logo:

In the back area of the power supply, CORSAIR advertises the silent operation mode again:

No comments available.

All information and graphics contained in Madshrimps are sole property of the Madshrimps crew and may not be reproduced or copied in any manner without written permission from us.