ASUSTOR AS1004T 4-bay NAS Review

Storage/NAS by stefan @ 2015-11-22

AS1004T NAS takes part of the latest ASUSTOR server series meant for home use, which does sport a Marvell ARMADA-385 1GHz Dual-Core processor, is paired with just 512MB of RAM and can house up to four drives. The chassis has been completely redesigned and in order to access the drives, we will have to completely remove the cover; unlike the previous NASes we have tested from the same company, this unit lacks trays and only 3.5’’ drives are supported for installation. Because of the utilized ARMADA-385 SoC, the overall power consumption is very low, while the four bays are cooled by a single 120mm fan located in the back. We can connect more devices to the NAS, but be aware that only two extra USB ports (3.0) are available with the server.

  • prev
  • next

Test Setup and Test Results

Test Setup

 

CPU : Intel I5 4690K Retail

CPU Cooler: Noctua NH-D14

Motherboard : BIOSTAR GAMING Z97X

RAM : GeIL EVO CORSA 16GB 2400MHz C11

(2GB Exceleram DDR1333 for NASPT compatibility)

Video : HIS 280X

Power Supply : Cooler Master 850W

SSD : OCZ Vertex 4 256GB

Case: Cooler Master ATCS840

 

To test the NAS performances, the AS1004T NAS was populated with one OCZ Vertex 4 SSD along with one KingFast SLC E-Drive in RAID 0, formatted with a single volume and the NAS was connected directly to the computer, to avoid any limitations by implying additional hardware like a router. The first simple test was performed by loading the test file onto a RAM drive and then it was copied to the NAS, on its shared folder. The speed was recorded with Total Commander:

 

 

The second test was to copy the same file back to the computer; for eliminating any HDD speed limitations, the file was copied back to the RAM drive:

 

 

For performing a more advanced test, the Intel NAS Performance Toolkit was used, for performing 5 different test runs. Here are the results:

 

 

As extras, we have also included ATTO Disk Benchmark and Anvil:

 

ATTO Disk Benchmark

 

 

Anvil

  • prev
  • next