Chassis

 

Nettop PC with black chassis made of metal

Dimensions: 190 x 165 x 43 mm (LWH) = 1.35 litres

Weight: 1.3 kg net and 2.1 kg gross

Two holes for Kensington Locks and numerous threaded holes (M3) at both sides of the chassis

 

Storage bay

 

1x 6.35 cm / 2.5" storage bay supports one hard disk or SSD drive

Device height: 9.5 or 12.5 mm (max.)

 

Operation System

 

This system comes without operating system.

It is compatible with Windows 8 / 8.1, Windows 7, Linux

 

Mainboard / Chipset / BIOS

 

Mainboard: Shuttle FS81 (8 layer design)

Mini-ITX form factor 17 x 17 cm

Chipset: Intel® H81 Express Chipset

(Intel DH82H81 PCH, code name "Lynx Point")

AMI BIOS in 8 Mbit EEPROM with SPI interface

All capacitors are high quality solid capacitors

Supports hardware monitoring and watch dog functionality

Supports Unified Extensible Firmware Interface (UEFI) [2]

Supports power on after power failure [8]

 

Power Adapter

 

External 90 W power adapter (fanless)

Input: 100~240 V AC, 50/60 Hz

Output: 19 V DC, 4.74 A, max. 90 W

DC Connector: 5.5/2.5mm (outer/inner diameter)

 

Processor support

 

Socket LGA 1150 (H3) supports the fourth generation of

Intel Core i7 / i5 / i3 / Pentium processors

Maximum supported processor power consumption (TDP) = 65W

Codename "Haswell", 22nm process technology, up to 8 MB of L3 cache

Supports the new generation of "Haswell Refresh" processors

Not compatible with older Socket LGA 1155 processors.

Does not support the unlock-function of Intel K-Series processors.

The Processor integrates PCI-Express, memory controller and the graphics engine on the same die (depends on processor type)

 

Processor cooling

 

Heat pipe processor cooling with two 60 mm fans on the upper side of the chassis

 

Memory support

 

2x SO-DIMM slots with 204 pins

Supports DDR3-1333/1600 SDRAM memory (PC3-10600/12800)

The maximum memory clock rate depends on the processor type.

Supports Dual Channel mode

Supports max. 8 GB per DIMM, maximum total size of 16 GB

Supports two unbuffered DIMM modules of 1.5 V

 

Integrated Graphics

 

The features of the integrated graphics function depend on the used processor type.

Supports Dual-Independent-Display at Full HD 1080p resolution

Supports Blu-ray (BD) playback with HDCP

Supports one 4K display running at 3840 x 2160 (2160p/60Hz) high resolution when connected to its DisplayPort video output

HDMI and DisplayPorts supports HD video plus multi-channel digital audio via a single cable

Optional D-Sub/VGA connector

 

Mini Slots

 

DS81 features two Mini expansion slots:

1) half size Mini-PCIe, supports PCIe 2.0 e.g. for WLAN cards

2) full size mSATA, supports SATA 6G

e.g. for Mini SATA (mSATA) flash memory cards

 

Audio

 

Audio Realtek® ALC 662-VC High-Definition Audio

Two analog audio connectors (3.5mm) at the front panel:

 

1) 2 channel line out (head phone)

2) microphone input

 

Digital multi-channel audio output: via HDMI and DisplayPort

 

Dual Gigabit LAN Controller

 

Dual Realtek 8111G Ethernet network controller (Gigabit)

Supports 10 / 100 / 1.000 MBit/s operation

With two RJ45 ports (dual network) supports Teaming

Supports WAKE ON LAN (WOL)

Supports network boot by Preboot eXecution Environment (PXE)

 

Drive connectors

 

1x Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth

1x Serial-ATA II, 3 Gb/s (300 MB/s) bandwidth

With Serial-ATA power connector (onboard)

Supports Unified Extensible Firmware Interface (UEFI)

Card Reader

Integrated card reader

Supports SD, SDHC and SDXC memory flash cards

Supports boot up from SD card

 

Front Panel connectors

 

Microphone input

Audio Line-out (headphone)

4x USB 2.0

SD card reader

Power button

Power LED (blue)

HDD LED (yellow)

 

Back Panel connectors

 

1x HDMI connector [1]

2x DisplayPort connectors (DP, supports 4k resolution)

Optional 1x D-Sub VGA connector (Accessory PVG01 [9])

2x USB 3.0

2x USB 2.0

2x Gigabit LAN (RJ45)

2x RS232 serial ports (5V/12V, 1x switchable to RS422 / RS485)

DC-input connector for external power adapter

Four pin connector (2.54 mm pitch) supports

- external power on button

- Clear CMOS function

- +5V DC voltage for external components

Perforation for optional Wireless LAN antennas (2 holes)

 

Other onboard connectors

 

Power on after power fail (hardware solution, Jumper 4) [8]

1x analog VGA graphics output (2x10 pins, 1mm pitch) [9]

1x USB 2.0 (4 Pins)

2x serial interface (COM) occupied for back panel connectors

Fan connector (4 pins) occupied by the cooling system

LPC interface (2x10 pins)

Audio connectors (7x2 pins)

Speaker connector (2 pins)

Power connector for SATA drives (4 pins)

 

Scope of delivery

 

Multi-language user guide

VESA mount for 75/100mm standard (two metal brackets)

Four thumbscrews M3 x 5 mm (screws together VESA mount and PC)

Four screws M4 x 10 mm (to fix the VESA mount to the external device)

Four screws M3 x 4 mm (to mount a 2.5" storage into the bay)

Driver DVD (Windows 7/8 32/64 bit)

1x SATA cable

External power adapter with power cord

Heatsink compound

 

Optional Accessories:

 

(1) WLN-S: Wireless LAN kit consisting of a Mini-PCIe card,

two antennas and appropriate antenna cables.

(2) PVG01: optional D-Sub VGA video output [9]

 

Environmental Specifications

 

Operating temperature range: 0~50 °C [7]

Relative humidity, non-condensing: 10~90%

 

Conformity/Certifications

 

EMI: FCC, CE, BSMI, C-Tick

Safety: CB, BSMI, ETL

This device is classed as a technical information

equipment (ITE) in class B and is intended for use in

living room and office. The CE-mark approves the

conformity by the EU-guidelines:

- EMV-guideline 89/336/EWG electromagnetic tolerance

- LVD-guideline 73/23/EWG use of electric devices

within certain voltage-limits