Storage/NAS by stefan @ 2013-06-20
QNAP has introduced a new NAS series with the latest QTS 4.0 Operating System. The unit comes with a single-core Marvell CPU at 2.0GHz, 1GB of RAM and features a lot of connectivity options. On the front it looks pretty much the same as the TS-469L, but now we also have an active LCD screen with two buttons for navigation, but the IR sensor is missing since the unit does not come with a HDMI output.
The TS-421 NAS is a new model from QNAP, aimed for homes and SOHO and comes with a single core Marvell 2.0GHz processor along with 1GB of DDR3 RAM. The product gets shipped inside a large cardboard box, with lots of information on the outside:
One of the laterals also shows us some small photos of the unit, in order to explain the interfaces:
After opening up the box, a small Quick Installation Guide leaflet will welcome us, with information regarding the setup procedure:
The inside of the box is organized similar as we have seen on the last NAS tested from them:
The bundle is located in a separate plain cardboard box:
Inside we have the power brick, two LAN cables and also two plastic bags with the necessary screws for mounting the drives (not re-sealable, unfortunately):
Copyright © 2001-2011 Madshrimps, All rights reserved.
Graphic Design by Dennis Kestelle, Programming by Maarten Menten,
Overall Site design by John Meys
All information and graphics contained in Madshrimps are sole property of the Madshrimps crew and may not be reproduced or copied in any manner without written permission from us.
Follow us on Twitter
Follow us on Facebook