Cooling/VGA & Other Cooling by stefan @ 2013-05-13
The new Notepal A200 Laptop Cooling Pad from Cooler Master comes with a 2-fan solution, one fan controller and two extra USB 2.0 ports. The pad can be also set at an angle, for more comfortable typing and the top brushed aluminum finish gives the product an overall professional look.
For testing the cooler, we have used the ACER E1-531 laptop, which features a Pentium B960 CPU, 4GB of preinstalled RAM and the original 500GB drive was replaced with a OWC Mercury Extreme 120GB SSD. The laptop was first used one hour for office work and watching some movie clips and afterwards we have left it sit in IDLE for about 30 minutes. For heating up the internal components we have used the AIDA64 Stress Testing module and for monitoring, we have downloaded the latest version of HWiNFO64. The testing was conducted in 3 modes, each which had 30 minutes of IDLE time for cooling down.
No Cooler Installed
NotePal A200 Minimum Fan Setting
NotePal A200 Maximum Fan Setting
During the time of testing, the temperature inside the room was kept at a steady 20.5 degrees Celsius.
Copyright © 2001-2011 Madshrimps, All rights reserved.
Graphic Design by Dennis Kestelle, Programming by Maarten Menten,
Overall Site design by John Meys
All information and graphics contained in Madshrimps are sole property of the Madshrimps crew and may not be reproduced or copied in any manner without written permission from us.
Follow us on Twitter
Follow us on Facebook