Test Setup
CPU: Intel I5 3570K Retail @ 4.7GHz
CPU Cooler: Noctua NH-D14
Motherboard: ECS Z77H2-AX Black Extreme
RAM: GeIL Black Dragon 2x4GB DDR2133 (@1600)
Video: HIS Radeon HD 7750
Power Supply: Cooler Master 850W
HDD: Seagate Barracuda 320GB 7200.10
Case: Cooler Master ATCS 840
With the help of the GPU-Z 0.6.4 utility, we could extract lots of information regarding the video card clocks,memory type, pixel and texture fill rate and so on:
To extract even more information, we have used the AIDA64 utility:
Here are the CAL capabilities of the RADEON HD 7750:
Temperature tests:
For finding out the temperatures in both IDLE and Full Load with the fan set on Auto, we left the computer IDLE for about 25 minutes and then started monitoring with HWINFO64 and logged the values obtained while running Heaven 3.0 at 2560x1440 resolution for an additional 30 minutes, with details at maximum and Tesselation set to Extreme. During this time, the ambient temperature was held steady at 25.4 degrees Celsius:
Noise measurements
Before finding out the noise the video card was producing, I have first measured the noise inside the room the tests took place and I found out it was 29.7dBA (with everything turned off).
At all times, the sound meter was placed 20cm near the video card.
The GPU fan was controlled by the latest version of Catalyst Control Center:
HIS have shipped the card with a special customization utility named iTurbo; after it has been installed, we will be welcomed by a minimal interface, like a wheel, with multiple items that we can access:
The full interface imitates a metallic housing, with a display in the center; the menus can be found on the top like Home, Info, Overclock and so on:
The Info tab lets us know detailed information regarding the installed VGA card:
From the Overclock tab we can clearly seen that the CCC limits can be exceeded without any issues:
Fan control profiles can be edited and saved in the respective tab:
Finally, we have some additional settings inside the next menu: