Product Features:

 

 

Product Specifications:

 

Fanless and silent

Passive cooling, no fan noise at all

Perfect to be used in noise-sensitive environments

Fanless, dust-free and thus virtually maintenance-free

 

Low power consumption

Power consumption: ca. 19W (idle mode) and ca. 27W (full load)

 

Chassis

Dimensions without Stand: 25.2 x 16.2 x 3.85 cm (DxHxW) = 1.57 L

Weight: 2.1 kg net, 2.8 kg gross

Hole for the Kensington Lock at the back panel

Optional accessory: 75mm and 100mm VESA mounting kit (PV01)

 

Operation System

This system comes without operating system.

It is compatible with Windows 7 (32 oder 64 bit)

 

Processor

Intel Dual Core Atom processor D2700 (Codename: Cedarview)

Intel Hyper-Threading technology: 2-threads per core

32 nm manufacturing process, Micro-FCBGA11 package

Intel 64 architecture, Core clock: 2.13 GHz

L2 Cache: 1024kB , TDP: max. 10W

Supports SSE2, SSE3, SSSE3, Execute Disable Bit

Integrated North Bridge with controller for memory and graphics

 

Passive cooling without fan

Passive, completely fanless cooling through convective heat transfer

Warning: Please make sure the system is always placed

upright using either its stand or the optional VESA mount.

Ventilation holes must not be blocked to ensure sufficient cooling.

 

Chipset

Intel® NM10 Express Chipset (south bridge)

Platform Controller Hub (PCH)

Code name: Tiger Point

 

BIOS

AMI BIOS in a 8Mbit Flash ROM supports PnP, ACPI 2.0

Supports external USB flash memory card boot up

Supports Power fail resume / AC power on state / always on / always off

Supports Wake-on-LAN (WOL) from S3, S3, S5 ACPI states

Supports Unified Extensible Firmware Interface (UEFI)

 

Memory

2x SO-DIMM slots with 204 pins

Supports two modules DDR3-1066 (PC3-8500)

DDR3-1333 is supported at DDR3-1066 clock rate

Supported maximum capacity: 4 GB

 

Optical drive (optional)

Support an optical DVD or Blu-ray slim-line drive

Serial ATA interface, 12.7mm height, Slimline SATA connector

 

Hard disk drive/SSD

Supports one Serial ATA hard disk (5400 / 7200 rpm)

or one SATA SSD drive in 6.35cm/2.5" format

The SATA 2.0 interface supports up to 300MB/s data transfer speed

Supports a drive with 9.5mm height (12.5mm is not supported)

Supports Unified Extensible Firmware Interface (UEFI)

 

Discrete ATI Graphics

AMD Radeon™ HD 7410M graphics processor (Codename "Seymore-LP")

Dedicated 3D graphics card

VRAM: 512MB DDR3, 800MHz, 64 bit (no shared memory)

160 Stream Processing Units, 40nm technology

Supports DirectX 11, Shader Model 5.0, OpenGL 4.1

Unified Video Decoder (UVD 3) dedicated video playback accelerator

Supports full HD decode (1080i/p)

Support for up to 2 simultaneous displays:

1) Digital HDMI™ 1.4a, max. resolution: 1920x1200

2) Analog D-Sub VGA, max. resolution: 2048x1536

Supports Extended Desktop Mode and Clone Mode

Supports Blu-ray play back in combination with an optional slim-line

Blu-ray drive and appropriate software

Integrated HD audio controller for 7.1 Surround Sound via HDMI.

Supports AC-3, AAC, Dolby TrueHD and DTS Master Audio formats.

 

Integrated Audio

IDT92HD81 Audio Codec with Azalia support

Two analog audio connectors (3.5mm):

1) Line out (head phone)

2) microphone input

Supports digital 7.1 HD audio via the HDMI port.

 

Card Reader

4-in-1 card reader at the front side

Supports SDHC, SD, MS und MS-pro memory cards

PCIe Interface

 

Wired Network

RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/sec.

Network controller JMC 251

Supports Wake-on-LAN (WOL) from S3, S3, S5 ACPI states

 

Wireless Network (WLAN)

Supports IEEE 802.11b/g/n, max. 150Mbps up-/downstream

Security: WPA/WPA2(-PSK), WEP 64/128bit, IEEE 802.11x/i

Half size Mini-PCIe-Card

 

Connectors

HDMI v1.3 digital video and audio output

D-Sub/ VGA analog video ( 15 pin)

5x USB 2.0 (1x front, 4x rear)

Gigabit network (LAN, RJ45)

Audio Line-out (head phone)

Microphone input

DC input for the external power adapter

 

LEDs and Buttons

Power button

Power LED (white)

Hard disk LED (blue)

 

Power supply

External 40W AC/DC power adapter (fanless), 19V / 2.1A

AC Input: 100~240V AC, 50~60Hz

Automatic voltage adjust

Dimensions: 89.5 x 37 x 26.5 mm (LWH)

DC Connector: 5.5/2.5mm (outer/inner diameter)

 

Optional Accessories

- VESA mount made of metal (PV01)

- Adapter for second 2.5" drive instead of optical drive (PHD2)

 

24/7 nonstop operation

This device is approved for 24/7 permanent operation.

Requirements:

- Free circulation of air amongst the PC must be guaranteed.

- Ventilation holes must be clear.

- If a hard disk is installed, this must also be approved for permanent

operation by its manufacturer (max. one hard disk)

 

Environmental Spec

Operating temperature range: 0~35°C

Relative humidity range: 10~90% (non-condensing)

 

Certification and Compliance

EMI: CE, FCC, BSMI, C-Tick, CCC

Safety: CB, BSMI, ETL

Other compliances: RoHS, Eup Lot6

This device is classed as a technical information

equipment (ITE) in class B and is intended for use in

living room and office. The CE-mark approves the

conformity by the EU-guidelines:

- EMV-guideline 89/336/EWG electromagnetic tolerance

- LVD-guideline 73/23/EWG use of electric devices

within certain voltage-limits