|
|
 |
|
 |
| |
Mounting the fans
On of the first fans we received for testing was the AcoustiFan Dustproof, they also included samples of vibration reducing mounting material.
Anti-vibration Soft Silicone Fan Gaskets
This mounting gear is designed for use on a PC case, not for use with CPU cooling, they are not the easiest to install, but not impossible.

The gasket can be had in 3 different sizes, 80/92/120mm, in the photo below you can see the 120mm version and 2 of the 4 mounting screws, as well as a close-up of the gasket installed onto a fan.


Although the product works as advertised, Acousti’s other vibration kit was more impressive:
Ultra-Soft Fan Mounts
While the fan gasket mentioned above will fit most fans, these Soft mounts will only work “flang type” fans (see the pictures on the previous page, all fans, except for the AF12, are flang type). Installation is extremely easy, first you pull the rubber mounts through the case’s mounting holes:


Then you align your fan and pull the mounts again until you see them popping out the fan’s bracket like this:

The whole installation takes only a fraction of the time compared to the gasket mount, and you don’t have to worry that your fan will fall off. The Ultra-Soft mounts might be very stretchy but at same time they provide for a secure fit, see this small movie for a demo:
Download/Full Screen - click here
For our performance tests we used the Ultra Soft mounts on all fans, except for the Arctic Fan 12, it was the only one which we had to screw tight, but its build-in anti-vibration system proved during testing that it was clearly working as no vibrations were transferred from the fan’s motor to the fan bracket; it’s really an impressive system.
Let’s take a closer look at the fans in our roundup ->
<<- Prev |-| Next ->>
More reviews in this category can be found below:
|
|
 |
|
 |
Copyright © 2001-2010 Madshrimps / JMkeOC.com, All rights reserved. Graphical Design by Dennis Kestelle, Programming by John Meys, Paul Meys and Frederik Colardyn, Overall Site design by John Meys
All information and graphics contained in Madshrimps are sole property of the Madshrimps crew and may not be reproduced or copied in any manner without written permission from us.
BTW-BE 0888919678
|
|