| [M]adness |
HWFaq  |
| Contests |
| Search |
| Links |
| Sponsors |
| Send News |
  |
| Sponsors |
| .Priorweb |
| Arctic Silver |
| Asus |
| Caseking |
| CoolerMaster |
| Danger Den |
| Dollarshops |
| Geeks.com |
| Gigabyte |
| MSI |
| OCZ |
| PC-Cooling |
| Scythe |
| Swiftech |
| Tones |
| ||-More-|| |
 |
 |
||||||||||||||||||||
 |
 |
||||||||||||||||||||
|
|||||||||||||||||||||
 |
 |
||||||||||||||||||||
 |
 |
|
|
In the PC industry HEAT is not just the by-product of ever increasing transistor counts and shrinking micro-processes, it’s also our arch nemesis. As the micro-processor industry seems to bear out Moore’s Law a multi-million dollar industry based on what are effectively ad hoc cooling solutions has evolved. One area where the term micro in micro-processing industry haunts us are those micro-pores and striations which exist in all heatsink base and IHS (Integrated Heat Spreader) surfaces. The illustrations below borrowed from the AMD white-paper Thermal Interface Material Comparison (pdf) and Koolance give an example of where these imperfections live.  The human eye cannot detect imperfections this minute and if left "untreated" you’re either going to experience very high processor temps affecting performance or CPU failure all together. Shortly after micro-processors began to produce more heat than their surfaces could dissipate the first heatsinks were born. At that point the need for a thermal interface material, to literally fill the gap in the new technology, was needed. As this new industry grew, choices and formulas for thermal interface materials were first on the R&D list. Silicon was the minimum standard and then metal based formulas hit the market. Silver in particular not only sounded great to the consumer, its high thermal conductivity made it an ideal ingredient (in small quantities). Of course it's not just conductivity, a TIM (Thermal Interface Material) must also fill surface gaps and hopefully displace the air that would remain without it. Air compared to Silver has a low conductivity as expressed in this formula W/m K = 0.026, while silver = 429.0. Between air and paste containing 10% silver, the latter seems a much better option.  The TIM industry has been working to develop the ultimate formula by attempting to incorporate those materials with the highest thermal conductivity and an ability to fill gaps. Of course those may be very important, but there are other attributes. AMD's white paper Thermal Interface Material Comparison lists five "Guidelines" or criteria for thermal interface materials. Listed verbatim they are: • Thermal conductivity of the material • Electrical conductivity of the material • Spreading characteristics of the material • Long-term stability and reliability of the material • Ease of application Electrical conductivity is of course high on the list and as we will discover this conundrum for manufacturers has prompted experimentation with many different materials. Albeit silver, silicon, or diamond most manufacturers have to consider all the guidelines if they want to produce a desirable product. Perhaps other criteria might be cost, although I really haven't heard too many PC-Enthusiasts complain once they've discovered how critical a robust thermal interface material is to the life of their processor.  1.) Arctic Cooling - MX-2 2.) Arctic Silver - AS5 3.) Arctic Silver - Ceramique 4.) Innovation Cooling - 7-Carat Thermal Compound 5.) Sunbeamtech - Tuniq TX-2 6.) ESG Nanotherm - PCM+ Onto thermal paste formulas ->  More reviews in this category can be found below: |
||
|
|
Copyright © 2001-2010 Madshrimps / JMkeOC.com, All rights reserved.
Graphical Design by Dennis Kestelle, Programming by John Meys, Paul Meys and Frederik Colardyn, Overall Site design by John Meys
All information and graphics contained in Madshrimps are sole property of the Madshrimps crew and may not be reproduced or copied in any manner without written permission from us.
BTW-BE 0888919678
Graphical Design by Dennis Kestelle, Programming by John Meys, Paul Meys and Frederik Colardyn, Overall Site design by John Meys
All information and graphics contained in Madshrimps are sole property of the Madshrimps crew and may not be reproduced or copied in any manner without written permission from us.
BTW-BE 0888919678
|
ADS by G | |
|
|
|
|
|
||
|
|
 |
Search Madshrimps |  |
 |
 |
|
|
|
||
 |
 |
|
Daily News | |
|
|
|
|
Hardware TPM Hacked... Chinese Site Copies... Configure Your Comp... Seagate debuts the ... AMD to Sample 32 nm... NVIDIA Optimus - Tr... Windows 7 Battery N... Asus jumps the gun,... MSI Shows Passive C... AMD's ATI Radeon HD... Intel's Sandy Bridg... Intel Core i7 660UM... AMD reveals Fusion ... MSI P55-GD55: A Mai... AMD Reveals More Ll... AMD’s Radeon HD 557... Gigabyte HD 5670 OC... Sapphire HD 5570 1 ... Powercolor HD 5870 ... [M] MSI P55-GD80 en...
|
||
|
|
|
Sponsor Space: | |
|
|
|
|
||
|
|
|
New Content | |
|
|
|
|
Articles/Reviews: USB 3.0 and SATA 6G... MSI Wind U135 Revie... Intel Clarkdale CPU... Three AMD 785G Moth... Vidabox Premium Wir... OCZ Throttle 32Gb e... Seven Intel P55 Mot... RAID 0 Stripe Sizes... Gigabyte Geforce GT... Intel Clarkdale vs ... Swiftech Apogee XT ... LanCool PC-K58 ATX ... Larkooler Universal... MSI GTX 275 Lightni... MSI Geforce GTX 275... Howto and Guides: Building a 300W Fan... NVIDIA Geforce 8400... NVIDIA Geforce 8800... Reviving and Volt M... Protect the core of... |
||
|
|