|
|
 |
|
 |
| |
Introduction
First we saw heat pipe technology incorporated with CPU heatsink, then VGA coolers followed and recently the trend has expanded towards other areas, like hard drive cooling, and chipset cooling. The “Chip Force” from Jing Ting is not the first heat pipe chipset cooler on the market, but it’s a product which shows quite a bit of potential.
The nForce4 chipset known to be a big source of heat, removing that heat with a small heatsink and 40mm fan usually results in a noisy solution, as that small fan has to spin 5000+rpm to keep the chipset from overheating. So using heat pipe technology can surely pay of in that area, however there’s a catch when you do decide to swap out that stock cooling solution and install a fancier one: size matters.
If you are running in SLI or even just with a single (large) PCIe card, chances are that the new Chipset heatsink and your VGA card will interfere. So today we take a closer look at Jing Ting’s offering to see if it can be used for effective cooling without losing precious space on your motherboard.

Specifications
| Jing Ting JTS-0005 Chipforce | | Material | Copper base & plated copper fins (29 fins) | | Heatsink Dimensions | 82mm* 67mm | | Fan Dimension & Specs | 40mm*40mm*10mm 4300rpm 4.3CFM | | Weight | 176gr |
Features
Pure Copper base material. Plated copper heat pipe, transfer the heat quickly. Universal patent designed adjustable heat pipe, broad array of application. 40mm fan included for increased heat dissipation. Easy installation.
| Next ->>
More reviews in this category can be found below:
|
|
 |
|
 |
Copyright © 2001-2010 Madshrimps / JMkeOC.com, All rights reserved. Graphical Design by Dennis Kestelle, Programming by John Meys, Paul Meys and Frederik Colardyn, Overall Site design by John Meys
All information and graphics contained in Madshrimps are sole property of the Madshrimps crew and may not be reproduced or copied in any manner without written permission from us.
BTW-BE 0888919678
|
|