Madshrimps News and interesting articles and howtos from the Web!Articles and Reviews, CPU Coolers, Cases, Motherboards, Videocards and more...Howto and guides on Modding and Optimising your PCFollow Interesting Discussions at our Forums!Find out more About Madshrimps and its crewStatistics - What article/howto is most popular and more!
[M]adness
HWFaq Hardware and Software Frequently Asked Questions - HWFaq
Contests Win Hardware! Join our contests now!
Search
Links
Sponsors
Send News
Video Card Comparison Charts

Intel Core i7 In-Depth Performance Scaling Analysis

Aircooled Heatsink Reviews

35x 120mm Fans Tested

Sponsors
.Priorweb
Arctic Silver
Asus
Caseking
CoolerMaster
Danger Den
Dollarshops
Geeks.com
Gigabyte
MSI
OCZ
PC-Cooling
Scythe
Swiftech
Tones
||-More-||
 
 
Sansun Bat Mid Tower ATX Case Review
Sansun Bat Mid Tower ATX Case Review
Sansun is a newcomer to the retail enclosure market; with years of experience in the distributor sector they put their experience to good use. Straight from the darkest pits of a dark cave comes their first offering, the Bat case. We draw the Joker from our pack of twisted product tests and find out if this case is up to the challenge.
Author piotke
Editor jmke
Date 2006-02-14
Print this Article

 
 


 
Madshimps (c)


Introduction

To be honest, until Sansun mailed me I hadn't seen their name before. The SANSUN group was established in Europe as an IT distributor, but they moved onto a specialized manufacturer in 2004. They offered us an opportunity to test their SN-C001 case nick-named the “Bat”, it’s a mid-tower sized ATX case with wings and creepy eyes.

Madshrimps (c)


You can pick your color:

Madshrimps (c)


Feature list:

  • Fancy Mask outside with Bat's wing shape side panels.
  • Unique mirror finished treatment
  • Bat wing shape side panels+ Bat grill+ 8cm fan
  • Optional 80mm Air conductor guide the CPU heat out of case
  • Removable HDD Cage and FDD cage
  • Screw-Less Clip For 5.25" Disk and I/O (optional)
  • Special I/O port on top design with dust-proof cover
  • Customized Ghost head on frontal Mask


  • With a weight of ~8 kg this case cannot compete with the lightweight cases instead you get extra functionality and a pre-modded case.

    Official specifications:

  • Model: SN-C001
  • Type: ATX Middle Tower
  • Mainboard: Intel P4/ AMD K7, K8/ MP Dual CPU 12” x 13”
  • Expansion slot: 7 full slot covers
  • Drive Bay: 4 x 5.25” / 2 x 3.5” / 4 x 3.5”HDD
  • Material: SECC, 0.7mm thickness
  • Optional Cooling system: Front: 8cm x 1 / Rear: 8cm x 2 or 12cm x 1 /
  • I/O: USB x 2, Audiox 2, IEEE 1394 x 1 (alltough no firewire was provided with the sample)
  • Case Dimension: 440D x 200W x 430mmH


  • More information can be found on the manufacturers' product website.

    In the package there was of course the case itself. In the case I could find a lot of screws, perfectly separated in different bags. This was very handy, as there was no timed wasted anymore by sifting through a large bag to find the fitting screw. No PSU or power cable was supplied with this case.

    Package:

    Madshrimps (c) Madshrimps (c) Madshrimps (c)


    The evil looking front represents a bat, while both the side panels have the bats' wings on them. Although made of plastic they look and feel strong. On the pictures this might look different, but they are quite solid.

    The frame and panels of the case are made of metal. And have nice mirror-finish blue paint on them.

    The Case:

    Madshrimps (c) Madshrimps (c)
    Madshrimps (c)


    Almost every enthusiast case now has headers for front USB ports and audio jacks. This case isn't different; Sansun has placed them on top of the case, next to the power and reset button. The front of the case remains untouched this way and perfectly symmetric.

    Top I/O panel:

    Madshrimps (c) Madshrimps (c)


    Behind the front door, the optical drive bays and external 3.5” bay is hidden, the covers are very well secured. Removing them requires removal of the front panel. That's also why that isn't secured when you get the case. The required screws needed to fix that can be found in one of the screw bags. Sounds like a lot of work.

    In practice it only adds a small amount of overhead during the installation compared to the average case, as the screws (-holes) are easily accessed.

    Front Door:

    Madshrimps (c) Madshrimps (c) Madshrimps (c)



    Cooling & Extra's

    To keep the system cool Sansun ships this case with an 80 mm and fan duct in the side panel. While using a smaller sized CPU cooler this will work perfectly, but from the moment on you start using third party coolers, which tend to tower over your motherboard, the panel with the fan duct can't be installed. But it's easily removed by unscrewing the 4 screws. Both side panels feature the same fan grill.

    There’s room for an additional 80mm fan in front of the HDD rack and an 120mm at the rear.

    Cooling:

    Madshrimps (c) Madshrimps (c)


    As mentioned before, both side panels feature the same 80mm blow hole cutout and fan grill, however on the right panel there’s no real point in having the blow hole, I guess it was done to keep the case symmetric.

    Side fan / Air flow

    Madshrimps (c) Madshrimps (c)


    The front panel features LEDs which are powered by a 4-pin molex, once connected the Bat’s eye lit up and emit a blue light. The other source of light are the power & reset buttons, which will light up blue or red, depending on their function. (Power led/HDD led)

    Lights on !

    Madshrimps (c) Madshrimps (c) Madshrimps (c)


    Let’s get a system installed ->

    | Next ->>




    Quick Page Jump:

    More reviews in this category can be found below:

  • LanCool PC-K58 ATX Mid Tower Case Review
  • Sunbeamtech Automaton ATX Case Review
  • Cooler Master Lab Test Bench V1.0 Review
  • Antec Three Hundred Case Midi Tower ATX Case Review
  • NZXT Tempest Airflow King ATX Case Review
  • In-Win B2 Stealth Bomber ATX Case Review
  • Arctic Cooling Silentium T2 ECO 80 ATX Case Review
  • Boogie Bug Black Pearl MicroATX Case Review
  • Sunbeamtech Acrylic HTPC-style ATX Case Review
  • Silverstone KL03 Kublai ATX Case Review
  •  
     

    Copyright © 2001-2010 Madshrimps / JMkeOC.com, All rights reserved.
    Graphical Design by Dennis Kestelle, Programming by John Meys, Paul Meys and Frederik Colardyn, Overall Site design by John Meys

    All information and graphics contained in Madshrimps are sole property of the Madshrimps crew and may not be reproduced or copied in any manner without written permission from us.

    BTW-BE 0888919678

    ADS by G
     
     
     
     

    Search Madshrimps
     
     
    Google
    Search Madshrimps:

     
     

    Daily News
     
      Hardware TPM Hacked...
    Chinese Site Copies...
    Configure Your Comp...
    Seagate debuts the ...
    AMD to Sample 32 nm...
    NVIDIA Optimus - Tr...
    Windows 7 Battery N...
    Asus jumps the gun,...
    MSI Shows Passive C...
    AMD's ATI Radeon HD...
    Intel's Sandy Bridg...
    Intel Core i7 660UM...
    AMD reveals Fusion ...
    MSI P55-GD55: A Mai...
    AMD Reveals More Ll...
    AMD’s Radeon HD 557...
    Gigabyte HD 5670 OC...
    Sapphire HD 5570 1 ...
    Powercolor HD 5870 ...
    [M] MSI P55-GD80 en...

    Syndicate Madshrimps Daily News with our XML/RSS Feed!

    Receive updates by e-mail

    Read more News...
     
     

    Sponsor Space:
     
     
     
     

    New Content
     
      Articles/Reviews:
    USB 3.0 and SATA 6G...
    MSI Wind U135 Revie...
    Intel Clarkdale CPU...
    Three AMD 785G Moth...
    Vidabox Premium Wir...
    OCZ Throttle 32Gb e...
    Seven Intel P55 Mot...
    RAID 0 Stripe Sizes...
    Gigabyte Geforce GT...
    Intel Clarkdale vs ...
    Swiftech Apogee XT ...
    LanCool PC-K58 ATX ...
    Larkooler Universal...
    MSI GTX 275 Lightni...
    MSI Geforce GTX 275...

    Howto and Guides:
    Building a 300W Fan...
    NVIDIA Geforce 8400...
    NVIDIA Geforce 8800...
    Reviving and Volt M...
    Protect the core of...